Mazda MX5 Miata RF Luggage Rack : Revo-Rack Black specific model for rear spoiler
£349.95
In stock
Only 0 left
Revo-Rack is a unique design of Mazda MX5/Miata RF Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot lid edge. Revo-Rack was developed for the MK4/ND/RF as the panel gaps are only 2-3mm there is no room for a traditional luggage rack clamp on the boot or trunk lid edges
With the Revo-Rack no metal touches your MX5 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot or trunk lid. These are not suction cups, suction creates vacuum. The grey buttons on the side of th cups are used to pump air out, creating a very secure hold.
This model of Revo-Rack is specific to the RF with the small rear lip spoiler and has an additional hole drilled in the frame so the third vacuum cup can be mounted to avoid the small lip spoiler on the RF.
All Revo-Racks are supplied with a cotton storage bag and two webbing luggage straps
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The Revo-Rack went through speed, braking and force tests, to ISO 11154:2006. Revo-Rack passed all these tests
Why a Revo-Rack Mazda MX5 RF Luggage Rack ?
Roof can be operated with Revo-Rack fitted
No clamps on the fragile boot/trunk lid edges
No bolts
No 3M tape
No drilling
No Straps
No paint damage
Due to the 2-3mm panel gap on the MX5 /Miata RF its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
Revo-Racks load carrying capacity has been rated at 45Ibs/20kg
Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
All Revo-Racks are supplied with a cotton storage bag and two webbing luggage straps
With the Revo-Rack no metal touches your MX5 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot or trunk lid. These are not suction cups, suction creates vacuum. The grey buttons on the side of th cups are used to pump air out, creating a very secure hold.
This model of Revo-Rack is specific to the RF with the small rear lip spoiler and has an additional hole drilled in the frame so the third vacuum cup can be mounted to avoid the small lip spoiler on the RF.
All Revo-Racks are supplied with a cotton storage bag and two webbing luggage straps
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The Revo-Rack went through speed, braking and force tests, to ISO 11154:2006. Revo-Rack passed all these tests
Why a Revo-Rack Mazda MX5 RF Luggage Rack ?
Roof can be operated with Revo-Rack fitted
No clamps on the fragile boot/trunk lid edges
No bolts
No 3M tape
No drilling
No Straps
No paint damage
Due to the 2-3mm panel gap on the MX5 /Miata RF its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
Revo-Racks load carrying capacity has been rated at 45Ibs/20kg
Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
All Revo-Racks are supplied with a cotton storage bag and two webbing luggage straps
Write Your Own Review