Nissan Figaro Luggage Rack : Revo-Rack PA
£389.95
In stock
Revo-Rack is an innovative design of Nissan Figaro Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges it requires no metal clamps and attaches to the rear of your Nissan using vacuum pad technology.
Vacuum cups are not suction cups, the grey buttons on the side of the cups are used to pump air out and create a very secure hold. We have been manufacturing Revo-Rack since 2016, with over 10,000 sold, this technology is reliable and safe.
We manufacture the Revo-Rack in either black or polished anodised finishes. Both racks use the same aluminium and magnesium alloy tubing.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for Road Vehicles Roof Carriers and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It’s the only luggage rack for sale globally to have achieved this certification, making it officially safe & secure to use.
Why a Revo-Rack Nissan Figaro Luggage Rack ?
No metal clamps that chip paint
No thick straps to chip boot/trunk lid edges
Fitted in a minute without tools, no awkward bolts or brackets.
Can carry 20kg
Lightweight aluminium frame - won’t ever rust.
Supplied with two luggage straps and a cotton storage bag
The Revo-Rack Frame :
The Revo-Rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.7kg / 3.6lb The frame measures 900x420mm / 36"x17"
Vacuum cups ?
Revo Rack is secured using three 120mm/5" vacuum pads, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum pads employ the force of atmospheric pressure to grip a surface: Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to actually remove the air from between the rubber pad and the car's surface thus creating a much more reliable hold. As full face of the pad is brought into contact with the paintwork, distortion is reduced, allowing the cup to be used with very little risk of damage. The rack is designed so that the pads can rotate on the frame to allow it fix to curvy boot lids like the Figaro.
Vacuum pads spread the weight of the luggage over a much wider area than a traditional clamp based rack with a small footprint on the fragile boot edges. As the footprint between the rack and car is much bigger, again minimising the risk of damage.
Vacuum cups are not suction cups, the grey buttons on the side of the cups are used to pump air out and create a very secure hold. We have been manufacturing Revo-Rack since 2016, with over 10,000 sold, this technology is reliable and safe.
We manufacture the Revo-Rack in either black or polished anodised finishes. Both racks use the same aluminium and magnesium alloy tubing.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for Road Vehicles Roof Carriers and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It’s the only luggage rack for sale globally to have achieved this certification, making it officially safe & secure to use.
Why a Revo-Rack Nissan Figaro Luggage Rack ?
No metal clamps that chip paint
No thick straps to chip boot/trunk lid edges
Fitted in a minute without tools, no awkward bolts or brackets.
Can carry 20kg
Lightweight aluminium frame - won’t ever rust.
Supplied with two luggage straps and a cotton storage bag
The Revo-Rack Frame :
The Revo-Rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.7kg / 3.6lb The frame measures 900x420mm / 36"x17"
Vacuum cups ?
Revo Rack is secured using three 120mm/5" vacuum pads, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum pads employ the force of atmospheric pressure to grip a surface: Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to actually remove the air from between the rubber pad and the car's surface thus creating a much more reliable hold. As full face of the pad is brought into contact with the paintwork, distortion is reduced, allowing the cup to be used with very little risk of damage. The rack is designed so that the pads can rotate on the frame to allow it fix to curvy boot lids like the Figaro.
Vacuum pads spread the weight of the luggage over a much wider area than a traditional clamp based rack with a small footprint on the fragile boot edges. As the footprint between the rack and car is much bigger, again minimising the risk of damage.
Write Your Own Review