Mazda MX5 MK3/MK3.5/NC Luggage Rack : Revo-Rack Polished & Anodised
$811.10
In stock
Only 0 left
Revo-Rack is a unique design of Mazda MX5 MK3 / NC Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges. Revo-Rack can be fitted in under a minute.
We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.
We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.
Revo-Rack attaches to your MX5 using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Why a Revo-Rack Luggage Rack ?
Revo-Rack is a completely new type of Mazda MX5 MK1 NA Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the deck/boot lid edges.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests
With the Revo-Rack car boot rack no metal touches your MX5/Miata only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot lid.
Why a Revo-Rack Mazda MX5 MK1 NA Luggage Rack ?
Shipped to Australia in 2-5 days with DHL Express
No clamps on the fragile aluminum boot lid edges
No bolts
No drilling
No straps
Zero risk of paint damage
Tested to ISO 11154
No paint damage
Revo-Racks load carrying capacity has been rated at 45Ibs / 20kg
Not immediately obvious how to release the rack from the boot lid - Impossible to pull off, therefore theft is difficult.
The Rack Frame :
This MX5 MK1 / NA luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lbs/1.8kg. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"/ 90x42cm
The Supports :
The rack is secured to your MX5 using three 5"/12cm vacuum cups, rated by the manufacturer as capable of holding an 40lb/20kg load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Whats in the box ?
Revo-Rack frame black powder coated
3 vacuum cups
2 x luggage straps
Large black storage bag
We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.
We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.
Revo-Rack attaches to your MX5 using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Why a Revo-Rack Luggage Rack ?
Revo-Rack is a completely new type of Mazda MX5 MK1 NA Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the deck/boot lid edges.
Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests
With the Revo-Rack car boot rack no metal touches your MX5/Miata only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot lid.
Why a Revo-Rack Mazda MX5 MK1 NA Luggage Rack ?
Shipped to Australia in 2-5 days with DHL Express
No clamps on the fragile aluminum boot lid edges
No bolts
No drilling
No straps
Zero risk of paint damage
Tested to ISO 11154
No paint damage
Revo-Racks load carrying capacity has been rated at 45Ibs / 20kg
Not immediately obvious how to release the rack from the boot lid - Impossible to pull off, therefore theft is difficult.
The Rack Frame :
This MX5 MK1 / NA luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lbs/1.8kg. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"/ 90x42cm
The Supports :
The rack is secured to your MX5 using three 5"/12cm vacuum cups, rated by the manufacturer as capable of holding an 40lb/20kg load each. These are very different to suction cups.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Whats in the box ?
Revo-Rack frame black powder coated
3 vacuum cups
2 x luggage straps
Large black storage bag
Write Your Own Review